MicroQ changelog ---------------- Version 2.14: ============= * fixed LFO clocking bug * changed intro (again) * fixed the multi/sound selection when leaving multimode * set global parameters to default values when entering Demo and back * changed Demos to get correct instrument status & panning * added (simple) MIDI loop detection (doesn't catch everything... but can be usefull in some cases) * changed the arp. send stuff in combination with local: now it's this way: uQrack + uQkeyboard: local on, arpsend on -> send arp'ed notes coming from keyboard as well as MIDI local on, arpsend off-> don't send arp'ed notes uQkeyboard only (uQRack is always local on) local off, arpsend on -> send arp'ed notes, don't arp incoming MIDI notes local on, arpsend off-> don't send arp'ed notes, arp incoming MIDI notes * minor bugs fixed Version 2.13: ============= * official 2.0 release version * bugfix: Vocoder clicks * minor bugs fixed Version 2b06: ============= * added multimode mixer * added panning support (multimode + controller 10) * re-organized the multi pages * bugfix: multi-mode drummap volume * bugfix: Q multi reception buggy Version 2.05: ============= * intermediate factory release * minor bugs fixed Version 2b04: ============= * replaced all 'On'/'Off' with 'on'/'off' * replaced in the "Rx PrgChg / Tx PrgChg" page 'Num' with 'Number' and 'Num + Bank' with 'Nmb.+Bank' * bugfix: Env. menu crashed sometimes * bugfix: Drummap sysex stuff was buggy Version 2.0: ============= features/functions added: * new effects added: *reverb *5.1 delay *5.1 clock delay * added "panning" parameter this parameter allows to pan an instrument individually or create mono outputs * direct mix input for mixing external audio signals directly into the microQ's effect section without needing a voice for this function * added tempo indicator for the Arp/Tempo section in Play Mode * various system improvements * new start up and screen saver design * minor bugs fixed Version 1.17: ============= * changed internal Factory tests Version 1.16: ============= * changed internal Factory tests Version 1.15: ============= * release version for microQ keyboard (of course also usable for micro Q Rack) features/functions added: * implemented search by Category (!) the category search algorithm is not exact science. There is started a background process which scans all the sounds cyclic. This is done to keep the processor load not too high. When a sound is requested the request lifts along this cyclic scanner and is then presented to the user. The catch is that whenever somebody changes a soundname/category it can take up to 10s before it is noticed by this scanner. * added Rx.PrgChg & Tx PrgChg to global menu (=transmission of progch. (!) use of full program change must be send in 3 messages: 1 bank select MSB (Bn 00 mm) 2 bank select LSB (Bn 20 nn) 3 program change (Cn pp) - mm is ignored, should be set to 0 - nn is bank number: 00..03 = bank A,B,C,D -> kept for compatibility with old implementation nn = b76543210 ||| ++-- 0..3 bank select (sound: A,B,C drump:D multi:A) |++------ 00 = select inst. sound | 01 = drummap | 10 = multi | 11 = reserved +----------- = 1 to differentiate between new & old implementation note1) In sequencer like Cubase this can be used by the BankSelect(MSB,LSB) option: bank 64..66 (0x40..0x42) = select sound A,B,C 80 (0x50) = select drummap D 96 (0x60) = select multi note2) The bankselect keeps active until the next bankselect! sending repeatedly program changes after a bankselect will cause this program changes to be interpreted with the same bankselection further stuff: * updated WXYZ stuff from Q OS3 in multimode it is possible to select 'global' for W,X,Y,Z in which case the global settings are taken (added a menu for this), controllers W,X,Y,Z take precedence above other controllers! * implemented request 'all' types in sysex * implemented mode change via MIDI * additionally it is possible to select the instrument now via MIDI: TYP x7 = mode (multi/single) BB = multimode / instr. selection: bit4,3,2,1 = instr. selection 0 = multimode (1==on, 0==off) note: this awkward bitallocation is used because of MW2 sysex basis... * implemented full keyboard support * made the MIDI indicator more attractive :-) * fixed bug when sysex device ID<>0 during Demo mode * added 'transpose' function for keyboard * changed keyboard communication * changed global menu: Ctl. Send/Receive * KBD: pedal1 is fixed to be hold * fixed bug multimode containing drummap recalled correctly now * double-clicking a numeric button no longer selects Card banks * adapted factory test to support extra buttons * changed product Test library to support 12 position product numbers * changed default contrast Version 1.14: ============= * problem solved for saving Global Settings * same features as 1.12 Version 1.12: ============= * added slow invalidation of LCD compare buffer to avoid blank chars: LCD is refreshed continiously now * fixed reception of controllers * fixed burn-in status transmission + report * plop at startup fixed * added pop-up text in 1st FX page when doing 'Shift' + 'Right.dial' (=FX settings to default) * packed together Multi-volume + Multi-output in one page * added Multi page containing FX1 & FX2 MIX * in Multi mode: 'MultiMode' + 'BigRedDial' selects instrument * fixed multimode bug where Edit buffers where overwritten * initsound 1.3 has F2 keytrack set to 0% * 'peek' is possible in compare mode now * init drummap keeps the selected drum * bug removed: edit buffer for drums didn't work * bug removed: select D.01 after power-up works now * bug removed: during 'Reorganizing Memory' SWD timer is called now * Selecting Vocoder does not click anymore * Timeout for delay effect reduced * Attack Level of ADS1DS2R works correctly now * minor bugs fixed Version 1.11: ============= * no release version * some new factory test routines added Version 1.10: ============= * changed Display contrast setting to be recalled *before* LOGO shows up * removed 'Info' popup in global 'version' 'serial' menus * fixed bug showing the Cursor when entring 'screensaver' mode * fixed some of the FX mix stuff * fixed the encoder assignment: 'tempo clock' * called set delay tempo stuff * set sync. to internal during DemoSongs * arp. can send notes now * Delay Tempo fixed. * removed 'WMF' from random sound (exchanged it for phonenumber :-) * updated the init sound to vs 1.2 * LFO speed bug fixed * Comb Filter clearing bug fixed * minor bugs fixed